SPECIFICATION


Zapp i300 Full Specification

Vehicle Type

EU Category
L3e -A2

Engine

Type
Air-cooled Interior permanent rare earth magnet electric motor
Max. output
14 kW (20hp) @ 3,000 rpm in Zapp mode
Max. torque
587 Nm at rear wheel in Zapp mode

Performance / fuel consumption

Maximum speed
96 km/h (electronically governed)
Acceleration 0-50 km/h
2.35 s
Acceleration 0-70 km/h
4.10 s
Range
60-90 km with both batteries in ECO mode
Regen
Selectable regen when throttle shut, range extension up to 10-20% possible

Electrical system

Battery
Air-cooled super compact lithium-ion high voltage battery
Battery capacity (gross)
1.25 kWh per battery x 2
Battery voltage
48 V (nominal)
Battery weight
5kgs per battery x 2

Power transmission

Drive
Swing-arm centred carbonfibre belt drive with 6.9:1 single reduction ratio via secondary carbonfibre belt

Chassis / brakes

Frame
Chrome-moly steel tube underbone/aluminium load-bearing exoskeleton
Front wheel location / suspension
Upside-down fork Ø 31 mm, spring pre-load manually adjustable with finite settings
Rear wheel location / suspension
Single-sided swing arm with direct-link spring strut, spring pre-load manually adjustable with finite settings
Suspension travel front / rear
99 mm / 60 mm
Wheelbase
1,387 mm
Castor
77 mm
Steering head angle
80°
Wheels
Cast aluminium wheels
Rim, front
3.50 x 14"
Rim, rear
4.50 x 14"
Tyres, front
120/70 R 14
Tyres, rear
140/60 R 14
Brake, front
Full floating single 250mm Ø disc, 4-piston floating caliper
Brake, rear
Full floating single 190mm Ø disc, 1-piston floating caliper
ABS
Single Channel ABS

Dimensions / weights

Length
1905 mm
Width (incl. mirrors)
968 mm
Height (excl. mirrors)
1193 mm
Seat height, unladen weight
750 mm
Unladen weight, road ready, both batteries
90 kgs
Permitted total weight
250 kgs
Payload (with standard equipment)
160 kgs
Carrying capacity
2 passengers / max. 150kg
Warranty
24 months
Emission
zero